Pentruder CBK at WOC.avi
The Pentruder CBK 22kW / 30 HP high cycle wall saw made some impressive performances at the Pentruder Inc booth at World of Concrete in Las Vegas last week, 1-5th of february 2010. It took just under three minutes to cut the slab which was 25 cm / 10" thick and 2 m / 6.5 ft long. The 18 rebars we...
tractiveab- Length: 3:27
- Views: 6339
- Tags: Concrete wall saw high cycle high frequency Tractive Pentruder Wandsäge väggsåg scie de mural
-
Pentruder WOC 2011.mov
An 8 minute video from the Pentruder Inc. stand at World of Concrete. At 2:15 the excellent automatic feed is demonstrated when the Pentruder CBK 22 kW / 30 HP is run with full speed into the concrete. At 4:10 minutes the new Pentruder MDU drill motor is introduced. Compared to these pictures it ...
- tractiveab
- Length: 8:07
- Views: 1794
- Tags: Pentruder drill motor coring wall saw high cycle high frequency wire saw borrmotor Bohmotor väggsåg betongsåg Wandsäge Seilsäge vajersåg MDU Tractive
-
Pentruder 3P8 HF Wire-Saw .wmv
Pentruder 3P8 HF-wire saw the start of the wire is easy. The very high torque already from start makes it possible to start without chamfering the corners at most times. The automatic feed and wire tensioning makes it very easy to work with and the smooth run leads to an increased lifetime of the...
- recconiam
- Length: 3:50
- Views: 1159
- Tags: Tractive Pentruder HF 3P8 Teesin Cimar Wire-saw cutting Wall-saw Controlled Demolition Specialist Construction Diamond wire Saw blade Science Technology
-
Pentruder Wall Saw
The problem: the door opening was 5cm (2") too narrow, and it hadd to be widened. It was not possible to bolt the saw to the marble finnish, and using a hand held saw was not possible of the tight tolerances given. The solution: we used the Pentruder 6-12 hydraulic wall saw to make a accurate cut...
- sparaloy
- Length: 0:47
- Views: 4938
- Tags: diamond demolition cut reinforcement käyttöauto vaasa kuormaauto marble door concrete engineering
-
Pentruder MDU Core Drill
A three minute video of the new Pentruder MDU Core Drill with NTGRA® technology at the World of Concrete. The drill bit is 12 inch (300 mm) and the concrete is 10 inch (25 cm) thick and the drilling took only 2:14 minutes. The very rigid drill stand and spindle bearing makes the drill start very ...
- tractiveab
- Length: 3:12
- Views: 264
- Tags: Pentruder Tractive MDU core drill NTGRA World of Concrete drill bit drill motor drilling drill stand concrete core drill
-
Pentruder 8-20HF cutting steel in Houston.avi
The Pentruder 8-20HF 22 kW / 30 HP 4-speed proved itself at a work site in Houston, Texas. With the really powerful high frequency motor in combination with the 4-speed gearbox the Pentruder 8-20HF had no problems coping with the job in tough Houston aggregate and heavy steel.
- tractiveab
- Length: 1:51
- Views: 2039
- Tags: Pentruder wall saw väggsåg scie de mural wandsäge Tractive high frequency high cycle hochfrequenz
-
Pentruder Inc. at World of Concrete 2012
Overview from the Pentruder Inc. booth at World of Concrete. Concrete cutting with Pentruder CBK Hi Cycle / High Frequency wall saw and core drilling with the Pentruder MDU Core Drill with NTGRA® technology.
- tractiveab
- Length: 5:18
- Views: 202
- Tags: wall saw core drill concrete saw high cycle high frequency Pentruder Tractive NTGRA
-
Tractive Pentruder 3P8 Wire-saw cutting
Tractive, Pentruder 3P8, Teesin, Wire-saw cutting, Wall-saw, Controlled Demolition, Specialist, Construction, Diamond wire, Saw blade,
- recconiam
- Length: 4:32
- Views: 1273
- Tags: Tractive Pentruder 3P8 Teesin Wire-saw cutting Wall-saw Controlled Demolition Specialist Construction Diamond wire Saw blade
-
Pentruder - Vis / Adamas - 2000 mm zaagblad
- adamas154
- Length: 4:18
- Views: 1144
- Tags: Pentruder 2 20 HF 2000 mm zaagblad zagen
-
Pentruder Wall Saw
The problem: the door opening was 5cm (2") too narrow, and it hadd to be widened. It was not possible to bolt the saw to the marble finnish, and using a hand held saw was not possible of the tight tolerances given. The solution: we used the Pentruder 6-12 hydraulic wall saw to make a accurate cut...
- sparaloy
- Length: 0:49
- Views: 1653
- Tags: diamond demolition cut reinforcement käyttöauto vaasa kuormaauto marble door
-
Pentruder 3P8 HF-wire saw.avi
With the Pentruder 3P8 HF-wire saw the start of the wire is easy. The very high torque already from start makes it possible to start without chamfering the corners at most times. The automatic feed and wire tensioning makes it very easy to work with and the smooth run leads to an increased lifeti...
- tractiveab
- Length: 0:34
- Views: 1164
- Tags: High frequency wire saw
-
Diamond Wire Saw Pentruder
The Pentruder 3P8 wire saw is the result of all our efforts to create the best and most efficient wire saw on the market. It combines low weight with extraordinary performance and is suitable for both small and very big jobs.
- thepittbull1976
- Length: 0:20
- Views: 138
- Tags: wire saw vaijerisaha
-
Pentruder - Adamas / Forbeton - kluis Parijs 5
Zagen van sparingen in een bank kluis te Parijs met de Pentruder draadzaag en wandzaag.
Pentruder 31 maart 2010.wmv
Met Gerrit, Kevin, Mart en Bertin dagje Pentruderzagen
- wilborsboom
- Length: 10:43
- Views: 561
- Tags: wilborsboom dnij borenenzagen boren en zagen kevinborsboom
-
Page: 1 of 6
